Help Center

English

Português
Español

English

Português
Español

Appearance

Target ZTE - F670L V1 ​

Introduction ​

This guide details the routing process of the ZTE F670L V1 device for the ACS (Auto Configuration Server) system, allowing remote management and automatic configuration of the equipment.

Prerequisites for pointing equipment ​

  • Domain:http://[seudominio]/tr069
  • Login: admin
  • Password: [informed during installation of the ACS system]
  • Periodic information: 1200 seconds
  • Authentication of connection request:
  • Login: IXCSoft
  • Password: [informed during ACS installation]
  • Connection door: 7547
  • What? Connection address: /tr069
This information is sent by email during the installation of the system. Not all equipment requires filling all fields.

Validation of Communication ​

Before proceeding with the statement, it is crucial to ensure that the route between the CPE (Customer Premises Equipment) and the ACS server is open. Perform the following diagnostic tests:

  1. Ping and Traceroute
  • In the router, access the diagnostics section.
  • Run ping and traceroute tests directed to the ACS server domain.
  • These commands will allow you to view the route and jumps made from the server IP to the equipment IP.

Step by step of the pointing ​

  1. Access the F670L v1 device administration interface - ZTE - ONT.
  2. Browse to Network > WAN > WAN Connection.
  3. Check that TR 069 is enabled in the WAN interface service list.
  4. For VOIP, check the INTERNET TR069 VOIP option.
  5. Go to Administration > TR-069 > Basic.
  6. Fill in the fields:
  • URL:http://[DOMINIODOACS]/tr069
  • User name: admin
  • User's password: [CHW's password]
  • Connect request user name: IXCSoft
  • Connect request sign: [CHW password]
  1. Mark Enable Periodic Information.
  2. Set Periodic Information Range to 300 seconds (default).
  3. Save the settings.

Configuration flow in ACS ​

graph TD
    A[Acessar interface do dispositivo] --> B[Verificar TR-069 na interface WAN]
    B --> C{TR-069 habilitado?}
    C -->|Sim| D[Acessar configurações TR-069]
    C -->|Não| E[Habilitar TR-069]
    E --> D
    D --> F[Preencher URL do ACS]
    F --> G[Configurar credenciais]
    G --> H[Habilitar informação periódica]
    H --> I[Definir intervalo de informação]
    I --> J[Salvar configurações]
    J --> K[Verificar conexão com ACS]

Final considerations ​

After configuration, the F670L v1 - ZTE - ONT device must establish connection with the ACS server. Check communication by monitoring device and ACS server logs to ensure correct information exchange.

Read it too ​